Toupret Humi Block 6kg
- STOPS DAMPNESS AND HUMIDITY
- IDEAL FOR CELLARS AND FAÇADES
- MOISTURE VAPOUR PERMEABLE
- LEVELS SURFACES
SUBSTRATES
HUMI-BLOCK can be applied on any raw masonry substrates, either dry, damp or wet but not dripping or running: • Cement, concrete, breeze blocks, bricks, stones
OVERCOATING
After complete drying, with any type of waterborne coating (moisture vapour permeable) minimum V2 classified as per NF EN 1062-1 or preparation fillers.
USE AND STORAGE CONDITIONS
Application tool: Blade or trowel • Tools cleaning: With water. • Preservation: product guaranteed 6 months, from the original purchase invoice date as evidence, stored in a dry place, away from frost and sun
SUBSTRATES PREPARATION
• Substrates to be prepared as per the current trade practices. • Substrates must be hard, cohesive, clean and sound. The substrate area being filled is required to be thoroughly cleaned back to the raw masonry both in the affective areas and the immediate surrounding area. All contaminates such as algae or fungus, etc must be removed.
CAUTION FOR USE
Under hot and dry weather conditions, wet the substrate a lot before application. The mixed product temperature modifies its setting time : a high temperature will accelerate it, a low temperature will delay it. Do not apply the product under a temperature of 5°C and above a temperature of 35°C, nor under direct sunlight nor on overheated surfaces
HEALTH AND SAFETY
• XI Irritating - Contains cement. • Very low VOC emissions : <0.01 % • Safety data sheets available on www.toupretpro.co.uk
